Several Matters Needing Attention In The Maintenance Of New Motorcycles

Several Matters Needing Attention In The Maintenance Of New Motorcycles

Date:Jan 20, 2021

First: Run-in oil

 

Everyone should know that the running-in period of motorcycles is 1500 km to 2000 km. You can change the oil according to the method of 200 km, 500 km, 800 km, 1500 km, and 2000 km. New car engine internal gear bite, ejector rod or chain work will produce scrap iron, so everyone should change frequently. Go to the special after-sales service to change the special oil, don't covet cheap oil.

 

Second: How to drive a motorcycle during the running-in period

 

The running-in period is actually the most troublesome thing. The speed of one gear can't exceed the limit speed of this gear. If the motorcycle is within 800 kilometers, try not to take people and climb too steep slopes, and don't let the car eat hard. This running-in effect will be the best.

 

Third: the end of running-in

 

After 2000 kilometers, it is not completely run-in. Try to increase the speed of all gears slowly and evenly to stimulate the potential to achieve the best effect. Clean the air filter (replace if it is a paper air filter) and oil filter element for 2500 kilometers, drain the oil and replace with new oil.

 

Fourth: post-maintenance

 

After maintenance, the oil and air filter are generally replaced based on 1500 kilometers. Check whether the battery is running off every month.


Previous: Magneto Rotor

Next: The Engine Fault Light Is On