Hisun 500 700 Magneto Rotor

Magnet motors mostly use rotating magnet type, and can be divided into single type and flywheel type according to the overall design.

Product Name: Hisun 500 700 Magneto Rotor                      ERP No: P004000311100000

Hisun Code: 31110-004000-0000                                           MOQ: 1 pc 

Shipping: Express                                                                    Delivery time: 3-15 days 

Hisun 500 700 Magneto RotorHisun ATV UTV Magneto Rotor

 

In the general instruction manual, the maximum gap of the adjusting contact is 0.3mm. For a magnet motor that has been removed from the contact mounting baseplate and improperly installed, it is not possible to adjust the contact gap only. This is because the primary current of the magneto motor ignition is different from the constant battery voltage supply of the automotive battery ignition coil. The maximum will be induced only when the magnet pole of the magneto rotor and the stator pole are in a certain position of the polarity exchange transition Only when the circuit breaker is disconnected at this time, the secondary coil will induce the strongest flashover voltage. To ensure this relationship, there is a engraved mark under the contact mounting base and the housing. However, the position of the line cannot be determined in the following situations: the bottom line is not clear, the bottom plate and the casing are not original, and the left and right-handed magnetic motors are modified by replacing the bottom plate. The following method can be used to roughly determine a certain position of the above polarity exchange transition: first loosen the two bottom plate fixing screws slightly, then turn the eccentric adjustment screw to the neutral position, slowly rotate the rotor by hand, and observe the shaft When the power-off cam is about to press the starting contact, the alternating point where the magnetic force changes from resistance to gravity is determined by the feel and is strictly fixed. At this time, observe the two contacts. If they are just slightly opened, you can tighten the two base plate fixing screws. If the two contacts are not opened or are too large, you can turn the base plate slightly to make the contacts just slightly opened and then tighten. solid. Finally, check whether the maximum opening degree meets the requirements. If the difference is too large, you can adjust the eccentric screw slightly, and then repeat the adjustment of the contact opening time, and you will get a satisfactory result. In the test, the ignition distance is generally more than 7mm.


We can supply Hisun 500 700 Magneto Rotor.


Fit for:

Hisun 500 ATV

Hisun 500 UTV

Hisun 700 ATV 

Hisun 700 UTV


Company Introduction: 

A professional ATV spare part supplier, who can supply you all kinds of ATV UTV parts fit for various brands, such as CF moto, Hisun, Linhai, Odes, BRP Can am, Polaris, Honda, etc. If you have any need or question, please feel free to contact us. We are here for you.

 

FAQ: 

How about the minimun quantity? 

The minimum quantity is 1 pieces.


Hot Tags: hisun 500 700 magneto rotor, manufacturers, factory, wholesale, OEM, original