CFMOTO 800CC Magneto

Most of the motors use the rotating flywheel and the fixed coil for electromagnetic induction to convert mechanical energy into electrical energy, which is the ignition power source in the gasoline engine ignition system. Most of the magneto motors use a rotating magnet type structure, which can be divided into a single type and a flywheel type according to the overall design.

1. Product Introduction

Most of the motors use the rotating flywheel and the fixed coil for electromagnetic induction to convert mechanical energy into electrical energy, which is the ignition power source in the gasoline engine ignition system. Most of the magneto motors use a rotating magnet type structure, which can be divided into a single type and a flywheel type according to the overall design.

Magneto's most basic working principle: permanent magnet rotating in the core, core on the primary coil induction electromotive force (called the primary potential), breaker contact closure when an electrical current (called the primary current), when the breaker contact suddenly opened, suddenly cut off the primary current, showed high secondary coil induction electromotive force (called secondary potential), make the spark plugs fire. In order to get the strongest spark plug jump, the maximum secondary potential should be obtained; In order to obtain the maximum secondary potential, the breaker contacts should be closed when the primary potential is zero and opened when the primary potential is maximum. When is the primary potential maximum? Primary potential maximum moment should be the permanent magnet pole around the neutral position 80°-100°, this Angle is called "bit Angle", to ensure that the broken contact relative to the correct CAM installation position can get the correct bit Angle, this requirement as long as the mark installation can be met. For example, when assembling the C210 magneto, the bottom plate of the breaker should be aligned with the two lines opposite to the housing, and the pointer on the breaker should be aligned with the mark on the CAM. When assembling C244 magneto, the engravings on the gears, the casing and the bottom plate of the breaker shall be aligned respectively. As for the requirement that the contact of the breaker should be closed when the primary potential is zero, as long as the bit Angle is correct and the contact gap is adjusted to the specified value can be satisfied. Of course, adjusting the contact gap to the specified value is not only to meet this requirement, but also to ensure that the spark is not too large when the contact is opened, so as to avoid premature ablation of the contact.

 

2. Product parameter(Specification)

Packing: Carton packing or as customer’s requirement.

Shipping: Express

Weight of magneto stator: 2kg

Size of magneto stator: 20*15*10 cm

Size of magneto rotor: 25*20*10

Weight of magneto rotor: 3.5kg

Part Number:

0800-031000  

0800-032000

Delivery time: 7-15 days

Material: Metal

Color: As pictures shown

Fit for: cf moto 800

   

3. Product details and application

cf moto 800 magneto 

cfmoto 800 magneto 

magneto for cfmoto 800cc 

magneto for cfmoto 800 

 

It may fits:

2012 CFMoto 800cc X8 ENGINE - MAGNETO ASSY

2012 CFMoto X8 TerraLander ATV - MAGNETO

2012 CFMoto X8 TerraLander ATV - MAGNETO

2013 CFMoto 800 Tracker Sport UTV - MAGNETO

2013 CFMoto 800 Tracker Sport UTV - MAGNETO

2013 CFMoto 800cc U8 ENGINE - MAGNETO ASSY

2013 CFMoto 800cc X8 ENGINE - MAGNETO ASSY

2013 CFMoto X8 800 ATV - MAGNETO

2013 CFMoto X8 800 ATV - MAGNETO

2014 CFMoto 800cc U8 ENGINE - MAGNETO ASSY

2014 CFMoto UForce 800 - MAGNETO

2014 CFMoto UForce 800 - MAGNETO

2014 CFMoto X8 EFI (Double Seat) - MAGNETO

2014 CFMoto X8 EFI (Double Seat) - MAGNETO

2015 CFMoto CF800 800cc - MAGNETO ASSY

2015 CFMoto UFORCE 800 EX UTV - MAGNETO

2015 CFMoto UFORCE 800 EX UTV - MAGNETO

2016 CFMoto UForce 800EX SSV - MAGNETO

2017 CFMoto CForce 800 Dual Seat - MAGNETO ASSY

2017 CFMoto UForce 800 Utility - MAGNETO ASSY

 

4. About us

image005image007

We are a manufacturer and wholesaler of ATV, UTV, GO-KART auto parts and ATV&UTV spare parts for more than ten years. We could supply most famous brand spare parts such as CF, Hisun, Linhai, Odes, Xinyue, Xinyang, Lifan, Loncin, Kazuma, Polaris, Honda, Yamaha, Can-am etc. Looking forward to cooperation.

 

5. FAQ

Q1. How about your delivery time?

A: Generally, it will take 30 to 40 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q2. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q3. What is your sample policy?

A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q4. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery. We have 2 technicians to check the quality and quantity before we are shipping to customers or keep it in warehouse.

Q5: How do you make our business long-term and good relationship?

A: 1. We keep good quality and competitive price to ensure our customers benefit;

2. We respect every customer as our friend and we sincerely do business and make friends with them, 
no matter where they come from.

3. We are very professional supplier, we also have 11 rich experiences on UTVs, ATVs, Buggy line, so we have ability to service any customers.

Hot Tags: cfmoto 800cc magneto, manufacturers, factory, wholesale, OEM, original