Kazuma J500 Jaguar 500cc Cylinder Kit

Kazuma ATV Quad 500 Cylinder Kit, Piston,Jaguar, STANI, 500cc

Kazuma J500 Jaguar 500cc Cylinder kit

 

Kazuma ATV/Quad 500 Cylinder Kit, Piston,Jaguar, STANI, 500cc

 

Part number:

192MR-1002100,192MR-1004001,192MR-1004100,192MR-1004004,192MR-1004005,192MR-1003015,192MR-1000002,192MR-1000006,192MR-1000300

 

Fit for Kazuma Jaguar 500cc


Kazuma J500 Jaguar 500cc Cylinder kitKazuma J500 Jaguar Cylinder kit

 

1) cylinder The inner diameter of the cylinder represents the output force of the cylinder.The piston should make smooth reciprocating sliding in the cylinder, and the surface roughness of the inner surface of the cylinder should reach Ra0.8 microns.SMC, CM2 cylinder piston adopts combination sealing ring to achieve two-way sealing, piston and piston rod are connected by pressure riveting, no nuts.

2) end cover The end cover is provided with an inlet and exhaust vent, and some are also provided with a buffer mechanism in the end cover.A seal ring and dust ring are arranged on the end cover of the rod side to prevent air leakage from the piston rod and prevent external dust from entering the cylinder.A guide sleeve is arranged on the end cover of the rod side to improve the guiding accuracy of the cylinder, bear a small amount of transverse load on the piston rod, reduce the down bending amount when the piston rod is extended, and extend the service life of the cylinder.Guide sleeve usually USES sintered oil - bearing alloy, forward - tilting copper casting.The end cover used to be malleable cast iron, to reduce weight and rust, often used aluminum alloy die-casting, miniature cylinder has the use of brass material. 

3)  the piston A piston is a pressurized part of a cylinder.A piston sealing ring is provided to prevent the left and right piston cavities from channeling gas with each other.The wear-resistant ring on the piston can improve the directivity of the cylinder, reduce the wear of the piston seal ring and reduce the friction resistance.The wear-resistant ring is made of polyurethane, polytetrafluoroethylene, cloth synthetic resin and other materials.The width of the piston is determined by the size of the seal ring and the length of the necessary sliding section.Sliding part is too short, easy to cause early wear and jam.Pistons are usually made of aluminum alloy and cast iron, and small cylinders are made of brass.

 

Q1: Can I get a price discount if I order large quantities?

Yes, it depends on your purchasing quantity, more quantity more discount.

Q2: If we don’t find what we need on your website, what should we do?

Do you develop new steering rack and pump? You can send us the OE number or of the product you need, we will check if we have them. We also develop new models according to customer’s need; you can contact us for more detail.


Hot Tags: kazuma j500 jaguar 500cc cylinder kit, manufacturers, factory, wholesale, OEM, original