Hisun 700 Left Ball Joint

In an automobile, ball joints are spherical bearings that connect the control arms to the steering knuckles. They are used on virtually every automobile made and work similarly to the ball-and-socket design of the human hip joint.In an automobile, ball joints are spherical bearings that connect the control arms to the steering knuckles. They are used on virtually every automobile made and work similarly to the ball-and-socket design of the human hip joint.

Product Name: Hisun 700 Left Ball Joint                                        ERP No: P107000641140000

Hisun Code: 62512-107-0000                                                         MOQ: 1 pc 

Shipping: Express                                                                            Delivery time: 3-15 days 

Hisun 700 ATV Ball JointHisun 500 ATV Left Ball Joint

 

A ball joint is used for allowing free rotation in two planes at the same time while preventing translation in any direction, including rotating in those planes. Combining two such joints with control arms enables motion in all three planes, allowing the front end of an automobile to be steered and a spring and shock (damper) suspension to make the ride comfortable.

A simple kingpin suspension requires that the upper and lower control arms (wishbones) have pivot axes that are parallel, and in strict geometric relationship to the kingpin, or the top and bottom trunnions, which connect the kingpin to the control arms, would be severely stressed and the bearings would suffer severe wear. In practice, many vehicles had elastomeric bearings in the horizontal pivots of the trunnions, which allowed some small amount of flexibility, however this was insufficient to allow much adjustment of caster to be made, and also introduced compliance where the suspension designer may not have desired it in his quest for optimum handling. Camber angle could generally be adjusted by moving both inner pivots of either the upper or lower control arm inwards or outwards by an exactly equal amount. But compliance of the control arm inner pivots, typically due to the use of elastomeric bearings, would again cause the trunnions to be stressed. The suspension designer's freedom was limited, it was necessary to have some compliance where it might not be wanted, and very little where more would have been useful in absorbing the fore and aft impact loading from bumps.

We can supply Hisun 700 Lrft Ball Joint,Balancing Lever


Fit for:

Hisun 400 ATV 

Hisun 500 ATV

Hisun 550 ATV

Hisun 700 ATV

Hisun 750  ATV

Hisun 1000 ATV


Company Introduction: 

A professional ATV spare part supplier, who can supply you all kinds of ATV UTV parts fit for various brands, such as CF moto, Hisun, Linhai, Odes, BRP Can am, Polaris, Honda, etc. If you have any need or question, please feel free to contact us. We are here for you.


FAQ: 

How about the minimun quantity? 

The minimum quantity is 1 piece.


Hot Tags: hisun 700 left ball joint, manufacturers, factory, wholesale, OEM, original